Ring of Daisies-Part II

Happy Friday, my friends, and thank you for coming back for Part II of my series. Today I get to show you the coordinating daisy candle rings that I created for our table. I’ve never made candle rings before, but after having so much success with the napkin rings, I was anxious to give them a try!

When I pictured this project in my mind, I envisioned white candle holders and taper candles so that the candle rings would really stand out. I didn’t want to use traditional candle sticks, but wanted to repurpose and paint a jar or glass of some kind to add some charm and interest to the table. I also wanted the holders to be low profile, so that my husband and I could still see each other over the candles. With these criteria in mind, I went “shopping” around my house and I finally settled on using wide mouth half-pint mason jars. These jars have a great shape, but I was a little concerned about the wide mouth. I didn’t know whether I could make a daisy big enough to cover the entire opening, without distorting it’s shape. I guess I was about to find out!

IMG_7614

I have painted a lot of mason jars and I prefer using the chalk paint pictured above. It provides excellent coverage and I love the opaque look it gives the jars. I put 3 coats of paint on each jar and then sanded the surfaces with extra fine sand paper to expose some of the words. I finished off each jar with a coat of the cream wax paint, which softens and smooths out the chalky finish. After you apply the cream wax, let it dry and then rub the jars with a cotton cloth to bring out the shine. Before I put the jars aside, I stuck the tapers in the middle of the jars with this candle adhesive that we purchased from Current many years ago. It really works and a little bit goes a long way!

IMG_7615

With the candle holders finished, I now needed to concentrate on the actual rings. When I initially thought about making the rings, I figured that I would just cut the flowers in half and wrap them around the taper candle. Wrong! I off set the petals as I add each flower layer, so if I cut the flowers in half, the entire flower would just fall apart. Once again, making these candle rings proved more challenging that I originally thought. I have got to stop coming up with these complicated ideas!

Instead of wrapping the flowers around the candles, I needed to make a ring to just slip over the candles. I measured the tapers and discovered that the candles were about 1″ in diameter where the candle ring would sit. I also measured the opening of the jars and determined that using the enlarged flower would cover the opening perfectly. So I put on my engineering hat and went to work. It took a lot of thought and failed attempts, but I finally figured out a way to create an open ring in the middle of the flowers while keeping them intact. Here come the pictures!

 

IMG_7563

And here come the circle punches again! I created rings by punching a 1″ circle out of  both a 1 1/2″ and a 1 3/4″ circle, and these rings helped hold the flower layers together when I cut the middle out of each flower. I ended up just using 2 size layers for each flower, and used a larger scallop circle for the flower center.

IMG_7566

 

I started out by making 8 enlarged flowers and punching out 8 of the larger daisy punch. I applied adhesive all around one of the 1 3/4″ circle rings and also added a little adhesive to each individual flower petal just beyond the circle edge. I centered a flower on the circle ring and pressed it down. Then I turned the flower over and snipped out the middle of the flower. As an aside, what does the picture above remind you of? You’re right; a ship’s wheel. You might be seeing that return on a future project. But I digress…..

IMG_7567

IMG_7569

I then added another flower, offsetting the petals and then turned it over and snipped out the middle again. It would have been much quicker to just put all four layers on and then use the 1″ circle punch to remove all four layers at once, but the hand punches can’t cut through more than one layer of card stock at a time.

I followed this same process until I had all four flowers layered together. Here’s what one flower size layer looked like at this point:

IMG_7570

Look at that–I did it! I created a flower layer that stayed together even with the middle cut out of it! Pretty impressive for a non-engineer!

IMG_7571

I then started over with the next flower size and followed the same process to complete all four flower layers using the 1 1/2″ circle ring. When this size flower was finished, I put some foam dimensionals on the larger layer and attached the two sized flowers together.

IMG_7572

IMG_7586

For the inner ring, I carefully snipped each scallop and glued 2 rings together, offsetting the scallops. I’m not planning to attach this ring to the flower layers; I’m just going to slip it on over the flower.

And now for the moment of truth–what does it look like when I put everything together? Will the flower ring stay together after I slip it over the candle? Let’s find out:

IMG_7573

What do you think? I absolutely love them, and I think they turned out even better than I imagined! The shape of the jars add so much charm and interest without detracting from the flower rings, which is exactly what I set out to accomplish. Now let’s see what they look like on the table along with the napkin rings:

IMG_7582

IMG_7583

Notice that my husband and I are practicing our social distancing! I kept the table settings plain and simple so that the napkin and candle rings would stand out. The woven placemats bring in some texture without adding color, and the lace trim on the cloth napkins compliments and highlights the sweetness and charm of the daisies.

These rings weren’t quick and easy to design and make, but they were definitely worth all of the time and effort. I absolutely love having the kitchen table decorated for Spring, and the overall effect is simple, soft and charming. It makes me smile every time I walk by or sit at the table.

It’s been great to spend some time together these past two days, but I am ready to take off my engineering cap; step away from the daisy hand punches; and move on to easier projects. All of this shelter in place time is perfect for crafters like me, so I am sure we will be together again soon. You are in my thoughts and I hope you stay healthy and safe. Until next time, remember:

“May the waves kiss your feet; the sand be your seat; and your friends out-number the stars.”

-C-

 

 

 

 

 

 

 

 

 

Rings of Daisies–Part I

I am still making paper daisies here–I can’t seem to put these hand punches down! Once you get a rhythm going, they come together so quickly and are addicting! While I was making all of the flowers for my Spring frame (see post here), an idea popped into my head to try and make daisy napkin rings and candle rings. I could just picture how sweet the kitchen table would look all decorated for Spring. Turning the picture I had in my head into a reality proved to be more challenging than I would have imagined, and required much more engineering that I am used to or good at. I have worked on these projects for two weeks and am finally ready to show you what I came up with. I decided to divide the “big reveal”  into two parts, as each post will be very photo heavy. So, are you ready for Part I? Then let’s go!

Part I is all about the napkin rings. I thought that this would be a quick and easy project–all I had to do was make the daisies, and then velcro some ribbon onto the back of each flower; much like I had done with my Easter napkin rings posted here. Wrong! I discovered that the flowers as is were too small to use as a napkin ring–they really needed one more layer.  If I had a third larger daisy punch, this would have been a piece of cake, but there isn’t such a punch. So this meant that I needed to figure out another way to add one more layer to each flower.

I soon realized that there were two issues that I needed to solve in trying to add on to each flower–not only did I need to lengthen each petal, but I also had to make sure that all of the petals were lengthened evenly. After a lot of trial and error, I finally came up with a process which my pictures will help to explain:

In order for the process to make sense, let me show you what supplies I used to make a 2-layer flower as pictured on my Spring frame:

IMG_7547

The only thing you need to take away from this picture is that you need 4 flowers of each daisy punch size to make up the bottom and middle layers of the daisies like I used on my picture frame.

To make a third, longer layer you will need an additional 8 flowers from the large daisy punch, plus (4) 1″ circles and (4) 1 3/4″ circles. I have punched the 1″ and 1 3/4″ circles out of navy card stock for visual effect:

IMG_7585

I used the different sized circles to ensure that each petal and flower were lengthened evenly. The next few pictures will explain this in more detail.

IMG_7549

The first thing I did was to glue the 1″ circles to the middle of 4 of the daisies, and then I cut off each petal beyond the 1″ circle, so that each petal was approximately the same length as all of the others.

IMG_7550

I then placed a 1 3/4″ circle in the middle of another daisy, and glued all of the petals pieces onto the shorter petals by placing them just beyond the circle edge. This is what it looks like once all of the petal pieces are glued on:

IMG_7551

I continued following the above steps until I had 4 lengthened flowers. This definitely was “futzy” and time-consuming; but worth it! I put an enlarged flower next to the smaller, original sized flower for comparison:

IMG_7553

You get an even better idea when you see the size comparison on actual napkins–I used rubber bands to gather the napkins and just sat the two flowers on top.

IMG_7554

The third layer makes such a difference, don’t you think? The smaller flower just gets lost  on the napkin–it just isn’t commanding enough to stand out.

IMG_7555

To create the actual ring, I used 6″ pieces of a white textured ribbon and 5/8″ white velcro dots.IMG_7556

I joined both sides of each dot together and stuck one in the middle of each ribbon and another on one end. I placed the flower on top of the middle dot and then brought the ribbon around and joined the two ribbon ends together to make a ring.

IMG_7558

And the napkin rings are done. Whew–thanks for enduring all of those pictures! As a reward, here is the picture you have been waiting for–the table all set:

IMG_7576

 

 

Well, I can’t show you the entire table yet, but here’s a sneak peak of a table setting. This will have to hold you until tomorrow, when I will post Part II–the candle rings.

Until then, I hope you are all healthy and safe, and that you are adapting to the new normal in our daily lives. It sure is a challenge, isn’t it! You are all in my thoughts, and until tomorrow, remember:

“May the waves kiss your feet; the sand be your seat; and your friends out-number the stars”.

-C-

 

It’s Spring?

When you look at the calendar, today is the first day of Spring. When you look outside, it is anything but Spring. Where is the warmth and the color? Since I can’t detect signs of spring outside, I decided to create my own version of spring that I can enjoy from inside my home:

IMG_7515

When I think of Spring, I think of flowers and pastel colors, so that is how this project started. I had recently learned how to make these paper daisies, and, because they were so much fun and easy to make, I ended up with a whole pile of them. I wanted to turn these flowers into some form of home decor, so I searched online for different ideas. The idea I kept coming back to was displaying the flowers on a frame, and when I found this frame on Amazon, I knew it was exactly what I had been looking for. The frame reminded me of a white picket fence, which was the perfect backdrop for my flowers.

This frame had a clip on it and was designed to hold a 4″ x 6″ picture. I didn’t want to use a photograph, but thought maybe I could find a free Spring printable to use instead. I hadn’t searched for long when I ran across this printable. I printed out the 4″ x 6″ size, cut it down, and mounted it on a coordinating piece of cardstock.

I now had all of the pieces for my home decor projects; all that was left to do was put it all together. I played around with the placement of the flowers and leaves until I was happy with the arrangement, and then hot glued them to the frame. The printable didn’t require any extra adhesive–the clip was strong enough to hold it securely.

I had so much fun decorating this frame that I ended up making a frame for our son and daughter. Our daughter’s frame looks just like the one pictured above. The frame I made for our son is different in that it uses a specific color combination, and I stamped a spring scene rather than using a printable:

IMG_7486

Here is a picture of the two different frames side by side for comparison:

IMG_7484

I’m happy with the way both of the frames turned out and couldn’t wait to send them to our kids. My frame is now in a corner of the pantry sitting on a metal cookbook holder that I had spray painted last fall. It is just what this dark corner needed!

IMG_7520_1

IMG_7522

This frame has brought some beauty and color to my environment, and, with all of the extra time we are all spending at home, it is amazing how much it has brightened my spirits to have seasonal decorations around to look at.

Take good care, my friends, and, as always remember,

“May the sand be your seat; the waves kiss your feet; and your friends out-number the stars”.

-C-

 

Stars, Stripes and Sailboats

Let me start by saying that it wasn’t my intention to spend my afternoon crafting, but sometimes impromptu crafting just happens and it is so much fun. And, believe you me, I ended up having more fun that one person should have on a rainy afternoon!

I was looking for some pictures on my computer when I ran across this picture:

IMG_4547

This was the window display of a paper store we walked by, and my heart skipped a beat or two when I saw this. I took this picture and then went into the shop to find out more about these absolutely adorable sailboats. I learned that all of these sailboats were made out of wrapping paper from a simple origami pattern. My favorite design was the polka dot paper at the bottom of the rows, so I ended up buying some of that paper, and left the shop thinking that the first thing I was going to do when I got home was look up how to make an origami sailboat.

Fast forward 2 years. I still have the wrapping paper, and I have bookmarked a pattern for a sailboat, but nothing more. Well…..I really can’t explain all that happened in the next 2 hours–all I know is that this picture sparked an idea, and the results of that idea were totally unexpected and totally awesome.

I began by making a sample sailboat from the pattern I had found. I started out with a 5″ square piece of wrapping paper, and ended up with a sailboat that was 3 1/2″ wide. I thought that was too small, so after some additional experimenting, I settled on a 7″ square piece of paper which gave me a sailboat that was 5″ wide. So it’s important to keep in mind that the end design will be smaller than the initial size paper square you start out with.

In what seemed like only a matter of minutes, I had four sailboats

IMG_6646

You could easily end up with a whole fleet of these babies in a matter of a few hours; it’s that quick and easy! I love the contrast of the white sails against the navy paper, and the pattern gives directions on how to accomplish this. The sailboats in the window display don’t have the contrast, so my best guess is that 2 squares of paper were adhered back to back before folding.

This is the point where things got interesting. I now have 4 sweet, navy and white polka dot sailboats; what am I going to do with them? The number 4 ended up being the key to the end result–I thought about all of the things I would need 4 of something for, and one of the first things that came to mind was table settings. And the rest goes something like this:

IMG_6648

I put one of the sailboats on a plate to check for size, and what hit me wasn’t anything to do with the size of the sailboat, but the fact that I had some major work to do to dress up this plate. Talk about boring! This was a situation! I definitely liked the size of the sailboat in comparison to the inner portion of the plate, but I needed to add something that added color and height, so that the sailboat would have some presence and take center stage.

One of the other pictures I ran across before all of this crafting began was of the rosettes I made to decorate the outside of my hand pie envelopes several years ago:

IMG_4401_2

I had a “eureka” moment, and decided to make some rosettes for the sailboats to sit on. I’ve never made large rosettes before, but I decided there was no time like the present and dove right in. The width of the inner portion of my plate is 7″, so I started with 7″ squares of paper. I cut 3 squares for each rosette. I accordion folded, or fan folded, each square in 1″ increments and then folded each strip in half and taped it together:

IMG_6647 (1)

From there I taped all three sections together, and when you attach the last two parts together, you get a rosette:

IMG_6649 (1)

IMG_6657

I topped each rosette with a starburst circle to cover up the middle, and now was the moment of truth–were these rosettes going to transform the plates from “why bother” to “wow”?

IMG_6651_1

Oh I think so, hand’s down! At this point I am kind of in shock! Decorating my table for the Fourth of July was the furthest thing from my mind 2 hours ago, and yet now I am staring at the sweetest; most charming table decorations ever! These decorations combine both the nautical and patriotic themes in a way that I never would have imagined, and I couldn’t wait to see what the table looked like with all four places set!

And so, that is the tale of how I went from a picture of a window display

IMG_4547

to a table display

IMG_6654_1

all in 2 hours on a rainy afternoon. I was so excited with the end result that I couldn’t wait to show you. I did add some tiny star table scatter, which I know is impractical, but it looks good. Sometimes impractical is worth it!

Thank you for taking the time to stop by, and, as always, remember:

“May the waves kiss your feet; the sand be your seat; and your friends out-number the stars.”

-C-

 

 

Summer Gift Tag Series–Part IV

I am down to designing the last 5 tags for this final bag style:

IMG_6504

The inspiration for this tag came from a Christmas ornament that I gave my husband several years ago. He has worked in corporate finance his entire career, and when I saw this ornament, I knew I had to get it for him. It is actually hanging above the towel hooks in our powder room, and, each time I look at it, I am reminded that I have always wanted to design a card or tag based on the concept:

IMG_6598

I think this is such a clever ornament, and I just love the play on words! I wanted each of my tags to feature an iconic, summer image, and surfboards definitely fit the bill.  The more I thought about the basic concept; the more I could picture the beginnings of a tag design in my mind. Since I have always wanted to re-create this idea, and since there is no time like the present, I decided to jump in and see what I could come up with. I can’t wait to show you how this tag turned out!

IMG_6507

I don’t own any surfboard stamps, so, just like with the flip flops, I found a template on line and reduced the scale to fit the tag base. The basic idea I had was to have 3 surfboards leaning up against a palm tree, so here is how I set the scene:

IMG_6596

The illusions of sand and water were created by sponging the inks directly onto the white background. The design was beginning to come together, but the pink board was too dark, and the surfboards look like fish. They needed definition and embellishment!

IMG_6597

Much better! Now all I needed was the lettering, and this is where I struggled. I had two options for the lettering stamps I chose to work with: I could either have white letters on ink squares

IMG_6594

or brown letters on colored card stock

IMG_6591

The original idea I had in my mind was to use the brown ink blocks with the white lettering, but when I laid it all out, I began to second guess myself. So I spent three days stamping all of the options pictured above, and, in the end, it came down to either the brown ink squares with the white lettering, or the brown letters on the pink card stock. I was really trying to stay away from using a lot of pink, so, after all of this time and effort, I circled back around to my initial choice.

IMG_6615_1

I glued the individual letter squares onto a card stock strip to keep them straight.

IMG_6616_1

And here it is; my finished tag. May I introduce you to my version of a summer “board meeting?! This tag took a lot of time, and trial and error, but I am really happy that I stuck with it. I love the final result, and I think this would be a fun tag to use for a summer company gathering. You’ll notice that I attached the tag with a mini clothespin rather than tying it on. After all of the time and effort I put in to this tag, I just couldn’t bare to punch a hole in it!

I’ve come to the end of my summer gift tag challenge, and I have designed and created 20 tags in a little over 2 weeks. Here’s a look at each individual tag:

IMG_6622_1

I set out to make bright, colorful tags featuring iconic summer images that coordinated with the 4 different bag styles that I found in my “stash”. I definitely think I accomplished my goal, and, as a result,  I have a basket full of fun tags to use throughout this season.

IMG_6620_1

Do you have a favorite? Each tag is so different from the others, and I did that on purpose–I wanted to end up with a fun assortment of choices that would work for a variety of recipients and gatherings.

I have mixed feelings about this challenge coming to an end–on the one hand, I have thoroughly enjoyed designing and creating these tags, but, on the other hand, I could use some time to restore a sense of order to my craft room. It’s a situation! Thank you for spending this time with me, and I hope we can continue to get together more often this summer. Until next time, take care, and, as always, remember:

“May the waves kiss your feet; the sand be your seat; and your friends out-number the stars.”

-C-

 

 

Summer Gift Tag Series–Part III

Today I will be focusing on creating a tag for the solid teal bag:

IMG_6576

and this tag is inspired by a trip my husband and I took to Bar Harbor and Acadia National Park this past weekend. As you stand atop the summit of Cadillac Mountain, you have a panoramic view of Southwest Harbor and the Atlantic ocean. The boats in the harbor and out on the water look like small white specks from the mountain top. My pictures certainly don’t do the views justice, but you can at least get a sense of the scale of the harbor below:

IMG_6551

IMG_6554

IMG_6567

I love seeing the sailboats out on the water, so today’s tag will feature a sailboat and also a more neutral color scheme. The following pictures will show how this tag came together from start:

IMG_6463

IMG_6464

IMG_6465

IMG_6466_1

to finish.

Since my other two tags have trended more to the feminine side, I wanted to mix things up and create something that is more masculine and versatile. The sailboat image; the stars; and the nautical color scheme all work together to accomplish this goal. The sailboat fits really well on the oval shape of this tag, but I needed to fill in a lot of white space around it. Splitting up the sentiment into separate words is a great technique to take up some of the extra white space.

IMG_6468_1

Looking at this picture, I am amazed at how this tag totally transforms the feel of this gift–the bag color by itself is definitely feminine, and yet when combined with the tag and plain tissue paper, it takes on a more neutral appearance which would be suitable for any recipient.

IMG_6579_1

IMG_6578_1

I am 3/4ths of the way through this challenge–15 tags made; 5 tags to go. I am just “sailing right along” with these tags (I apologize–I couldn’t help myself!) and my basket is filling up nicely. I hope you’ll check back for the final part of this series, as, in my opinion, I have saved the best for last! Have a great week, and, as always, remember:

“May the waves kiss your feet; the sand be your seat, and your friends out-number the stars.”

-C-

 

Summer Gift Tag Series–Part II

As a quick recap–I found some gift bags in my craft room two weeks ago, and I have challenged myself to make summer gift tags for each of the four different bag styles. In Part I of this series, I made a tag to go with the polka dot teal bag:

IMG_6443_2

and today, in Part II of this series, I will be designing a tag for the solid pink bag:

IMG_6488

I want this tag to be bright and fun, so that it stands out against the solid background of the bag. In thinking about that goal, colorful flip flops came to mind, so that became the starting point for this tag. I played around with the flip flop stamps that I have, but I just couldn’t come up with a pattern that I liked. So, I abandoned the stamps and found a flip flop template on line. As my Mom used to say: “Sometimes you don’t try harder; you try different”. I will now let my pictures tell the story of my design process from start:

IMG_6489

IMG_6490

IMG_6486.jpg

IMG_6491

IMG_6493

IMG_6492_1

to finish.

Once I had the template enlarged to my satisfaction, I cut the flip flop bases out of three different patterned papers. The patterned paper isn’t as sturdy as regular card stock, so I backed each tag with white card stock for extra stability. When I looked at the tag bases together, the navy ones were too dark, so I made additional lime green and teal flip flops to bring the total back to 6. Once I added the flowers and the sentiment, these flip flops really came to life. These tags are bright; they are fun; and they are the perfect summer decoration for these pink gift bags! They are nothing like I had pictured, but exactly what I had wanted to accomplish!

IMG_6494_1

IMG_6496_1

Fun tags can’t be attached to the bags just any ole’ way, so I used the dog tag chains instead of bakers twine or clothespins. I got the idea from a new pair of shoes I purchased this past weekend. There was a key chain attached to one of the shoes with this type of chain. Inspiration is everywhere!

IMG_6498_1

IMG_6499_1

I am halfway through this challenge, and my basket is half full with these colorful, summer gift tags.  They just make me smile! Stay tuned for Part III, and, as always, remember:

“May the waves kiss your feet; the sand be your seat; and your friends out-number the stars.”

-C-