Rings of Daisies–Part I

I am still making paper daisies here–I can’t seem to put these hand punches down! Once you get a rhythm going, they come together so quickly and are addicting! While I was making all of the flowers for my Spring frame (see post here), an idea popped into my head to try and make daisy napkin rings and candle rings. I could just picture how sweet the kitchen table would look all decorated for Spring. Turning the picture I had in my head into a reality proved to be more challenging than I would have imagined, and required much more engineering that I am used to or good at. I have worked on these projects for two weeks and am finally ready to show you what I came up with. I decided to divide the “big reveal”  into two parts, as each post will be very photo heavy. So, are you ready for Part I? Then let’s go!

Part I is all about the napkin rings. I thought that this would be a quick and easy project–all I had to do was make the daisies, and then velcro some ribbon onto the back of each flower; much like I had done with my Easter napkin rings posted here. Wrong! I discovered that the flowers as is were too small to use as a napkin ring–they really needed one more layer.  If I had a third larger daisy punch, this would have been a piece of cake, but there isn’t such a punch. So this meant that I needed to figure out another way to add one more layer to each flower.

I soon realized that there were two issues that I needed to solve in trying to add on to each flower–not only did I need to lengthen each petal, but I also had to make sure that all of the petals were lengthened evenly. After a lot of trial and error, I finally came up with a process which my pictures will help to explain:

In order for the process to make sense, let me show you what supplies I used to make a 2-layer flower as pictured on my Spring frame:

IMG_7547

The only thing you need to take away from this picture is that you need 4 flowers of each daisy punch size to make up the bottom and middle layers of the daisies like I used on my picture frame.

To make a third, longer layer you will need an additional 8 flowers from the large daisy punch, plus (4) 1″ circles and (4) 1 3/4″ circles. I have punched the 1″ and 1 3/4″ circles out of navy card stock for visual effect:

IMG_7585

I used the different sized circles to ensure that each petal and flower were lengthened evenly. The next few pictures will explain this in more detail.

IMG_7549

The first thing I did was to glue the 1″ circles to the middle of 4 of the daisies, and then I cut off each petal beyond the 1″ circle, so that each petal was approximately the same length as all of the others.

IMG_7550

I then placed a 1 3/4″ circle in the middle of another daisy, and glued all of the petals pieces onto the shorter petals by placing them just beyond the circle edge. This is what it looks like once all of the petal pieces are glued on:

IMG_7551

I continued following the above steps until I had 4 lengthened flowers. This definitely was “futzy” and time-consuming; but worth it! I put an enlarged flower next to the smaller, original sized flower for comparison:

IMG_7553

You get an even better idea when you see the size comparison on actual napkins–I used rubber bands to gather the napkins and just sat the two flowers on top.

IMG_7554

The third layer makes such a difference, don’t you think? The smaller flower just gets lost  on the napkin–it just isn’t commanding enough to stand out.

IMG_7555

To create the actual ring, I used 6″ pieces of a white textured ribbon and 5/8″ white velcro dots.IMG_7556

I joined both sides of each dot together and stuck one in the middle of each ribbon and another on one end. I placed the flower on top of the middle dot and then brought the ribbon around and joined the two ribbon ends together to make a ring.

IMG_7558

And the napkin rings are done. Whew–thanks for enduring all of those pictures! As a reward, here is the picture you have been waiting for–the table all set:

IMG_7576

 

 

Well, I can’t show you the entire table yet, but here’s a sneak peak of a table setting. This will have to hold you until tomorrow, when I will post Part II–the candle rings.

Until then, I hope you are all healthy and safe, and that you are adapting to the new normal in our daily lives. It sure is a challenge, isn’t it! You are all in my thoughts, and until tomorrow, remember:

“May the waves kiss your feet; the sand be your seat; and your friends out-number the stars”.

-C-

 

Embroidery Hoop Napkin Rings

We are hosting Easter dinner this year, and it has been many years since we have hosted the meal for this particular holiday. I spent some time over the weekend searching for table decoration ideas, as I will be starting from scratch. I am going to need napkin rings, place cards, centerpieces–the works!

During my search, I discovered this napkin ring from Pier 1, and the minute I saw it I knew I had found the inspiration for our napkin rings. It wasn’t the embellishment that caught my eye; it was the basic bunny shape wrapped in twine that intrigued me. The twine added so much texture and gave the napkin ring a nautical look, which I’m sure is why I was so attracted to it in the first place. I printed out the picture and turned my attention to my supplies, hoping that I would have something that would help me make the basic bunny shape.

As luck would have it, I discovered that I had just the thing to make the bunny shape– embroidery hoops. Stampin’ Up! released these mini embroidery hoops in their Occasions 2018 (Spring) catalog:

occ18_p19d

They come in 2 sizes: 1 1/2″ and 1 3/4″, and the variation in size is exactly what I need for my bunny body. Timing really is everything, because without these hoops, I wouldn’t have had a chance to try and replicate the napkin rings! I had ordered some of these hoops when the catalog came out, so I spent the rest of the weekend coming up with my design. I’m really excited about how these napkin rings turned out, and I’m ready to show you what I came up with.

I chose a navy and white color combination, which will coordinate with our dishes. Yes, I know that this doesn’t fit the traditional pastel color scheme used for Easter, but the glorious thing about paper crafting is that it’s not bound by rules or limitations; it’s about letting your creative juices flow and enjoying every step of the process.

Here is a look at all of the supplies I used:

napkin ring supplies_1

The hoops have a dark stain on them, and I was concerned that the stain might show through the loops of twine. Luckily that wasn’t the case, as needing to spray paint the hoops would certainly slow down production considerably. The hoops and twine create the basic bunny body; the rest of the supplies are used to create the embellishments.

Start by wrapping both of the embroidery hoops with the twine. I found that it took about 55″ of twine for the large hoop, and 45″ of twine for the smaller hoop. I left a tail at the beginning and the end and tied it behind the closure in a knot. I hot glued the knot before trimming off the ends.

knot on hoop_1

hoops and button_1

Once both hoops are wrapped in twine, I glued both closure ends to a white button that was a little wider than the closures. While the glue is drying, it’s a good time to start working on the embellishments.

bunny parts_1

Cut two 2 1/2″ pieces of a white pipe cleaner for the ears. Fold each piece into ear shapes and glue one end over the other. Cut a 2 x 2 piece of patterned paper–I am using a pattern from Stampin’ Up’s new Tutti Frutti Designer Series Paper. The polka dots are oval shaped and they remind me of eggs. Score the paper every 1/4″ and fan fold starting and ending with a mountain fold. Make into a bow tie by placing a glue dot in each of the 3 valley folds on top as close to the middle as possible. Turn the paper over and put glue dots in the 2 valley folds and then squeeze the paper in the middle. Fan out the ends and it should look something like this:

bow tie_1

Finish up the embellishments by punching a 7/8″ scalloped circle with the solid color card stock. Make a bow with the gingham ribbon. And now comes the fun part; let’s turn these hoops into a bunny!

bunny ears_1

Glue the ears on and attach the scalloped circle over the hoop closures with glue dots. Attach a white pom pom in the middle of the bow tie and the bow. Attach either the bow tie or bow onto the scalloped circle, and your bunny is complete.

completed peter and flopsy_1

Allow me to introduce you to The Cottontails! I dressed them in their Easter finest, and they are almost ready to help me set my table for Easter dinner! All that is left to do is to create the rings and these bunnies will be ready to hop on over to my table.

I cut two 7″ pieces of the navy saddle stitch ribbon and attached glue dots to each end. Using the ribbon for the ring minimizes the chance that my cloth napkins will get snagged by the roughness of the inside of the ring. I then attached the bunny to the ribbon with velcro dots. I chose to use velcro dots instead of hot glue to allow for some extra stretch and movement of the ribbon.

And now for the moment we’ve all be waiting for– let’s see how the napkin rings look on the table:

table settings

flopsy close-up_1

peter close-up_1

These napkin rings add so much charm and personality to the table, and I just can’t help but smile every time I look at them. The white pom poms add a touch of bunny fluff, and they really amp up the cuteness factor for sure! These napkin rings turned out better than I imagined and I couldn’t be happier.

Thanks for dropping in today and for enduring such a long post! I’m really proud of these napkin rings and I couldn’t wait to show them to you! Take care, and, as always, remember:

“May the waves kiss your feet; the sand be your seat; and your friends out number the stars”.

-C-

 

 

SaveSave